TIBBO EM1001

Datasheets: Nessuno.

EM1001 Programmable IoT Board

Marca: Tibbo

Caratteristica:

The EM1001 is a full-featured Tibbo BASIC/C-programmable IoT Board with Ethernet, as well as optional Wi-Fi* and 4G/LTE cellular** connectivity. The EM1001 has four UARTs.

The board is self-sufficient - it does not require a host PCB to plug into. The RJ45 jack is mounted directly on the board. The EM1001 also contains a DC-DC regulator that can power the board and has an additional current budget for external hardware.

The device's capabilities are further enhanced by the onboard flash memory hosting a hardened fault-tolerant file system, as well as the EEPROM and RTC. The RTC backup supercapacitor can be installed on the board ("-S" ordering option) or connected externally.

The EM1001 has 54 general-purpose I/O lines and can control an external LCD, keypad, buzzer, card readers, serial devices, and other circuitry. All I/O lines are accessible through two dual-row connectors with the standard 2.54mm (100mil) pitch.

The EM1001 is a close relative of the EM1000 IoT module.

* Requires the WA2000 Wi-Fi add-on, which can be connected externally or piggybacked on top of the EM1001.

** Requires a standard 4G/LTE modem (i.e., Simcom's SIM7500) to be connected to a UART of the EM1001.


In full production but not recommended for new projects.
Consider the EM2001 instead.